SikaShield® P24 S 4 mm APP Modified Bituminous Waterproofing Membrane

Product Category: Waterproofing Membrane Brand: Sika Model Code: SikaShield® P24 S 4 mm

Description

• APP modified bituminous waterproofing membrane

• Nominal thickness 4 mm

• Reinforced with non-woven polyester fabric

• Maintains flexibility at 0 °C

• Sand-coated top surface ensures strong bonding with protection layers

• Burn-off polyethylene film underside for easy torch application

Uses

Suitable waterproofing solution for:

• Balconies and terraces under tiles or gravel protection

• Flat and sloping roofs with ballast or protection layers

• Car park decks

• Wet areas

• Basements and underground structures

• Horizontal reinforced concrete slabs, decks, podiums, and protrusions

• Vertical reinforced concrete walls

System Use

• Base sheet in multi-layer waterproofing systems

Note

• Not recommended for roofs permanently exposed to UV radiation

Features

• ✔ Can be painted immediately after installation

• ✔ Easy torch-applied installation

• ✔ Fully bonded waterproofing layer

• ✔ Good durability and long service life

• ✔ High tensile, tear, and shear resistance

• ✔ Insulation panels can be bonded without special adhesives or fixings

• ✔ Sand-surfaced for strong adhesion between layers

Product Information

• Composition: APP modified bitumen

• Reinforcement: Non-woven polyester fabric

Packaging

• Roll Width: 1.0 m ±1%

• Roll Length: 10.0 m ±1%

Appearance

• Top Surface: Sand coated

• Bottom Surface: Polyethylene burn-off film

Effective Thickness

• 4.0 mm ±0.2 mm (EN 1849-1)

Storage & Shelf Life

• Shelf Life: 12 months from production date

• Store in original unopened packaging

• Storage Temperature: +5 °C to +35 °C

• Store rolls vertically

• Do not stack pallets on top of each other

Technical Information

Tear Resistance (EN 12310-1)

• Longitudinal (MD): 150 N ±45 N

• Transversal (CMD): 150 N ±45 N

Joint Shear Resistance (EN 12317-1)

• Longitudinal: 500 N/50 mm ±100 N/50 mm

• Transversal: 350 N/50 mm ±70 N/50 mm

Flexibility at Low Temperature

• ≤ 0 °C (EN 1109)

Maximum Tensile Force (EN 12311-1)

• Longitudinal (MD): 600 N/50 mm ±120 N/50 mm

• Transversal (CMD): 400 N/50 mm ±80 N/50 mm

Elongation at Maximum Tensile Force

• Longitudinal (MD): 30% ±15%

• Transversal (CMD): 30% ±15%

Application Information

• Ambient Air Temperature: +5 °C to +40 °C

• Substrate Temperature: +5 °C to +40 °C

• Relative Air Humidity: Maximum 80%