SikaCeram-99 Floor and Wall KH | Cementitious tile adhesive
Product Category: Tile Adhesive
Brand: Sika
Model Code: SikaCeram®-99 Floor & Wall KH
Description
SikaCeram®-99 Floor & Wall KH is a pre-packed cementitious tile adhesive, designed for floor and wall tile installation. It can be used as thin bed or thick bed adhesive, suitable for both interior and exterior applications.
Applications
Suitable Tiles
Ceramic tiles
Porcelain tiles
Homogeneous tiles
Absorbing tiles
Suitable Areas
Floor and wall
Interior and exterior applications
👉 For better performance (especially exterior or wet area):
Mix with SikaLatex®
Key Features
Good adhesion to common substrates
Easy application and workability
Adjustable tile position up to 20 minutes
No need to soak tiles before installation
Compatible with SikaLatex® for improved performance
Cost-effective solution
Product Information
Type: Cementitious tile adhesive
Packaging
20 kg bag
Shelf Life
Minimum 9 months
Storage
Dry, cool, shaded place
Sealed packaging
Density
~1.49 kg/L
Technical Data
Tensile Adhesion Strength: ≥0.5 N/mm²
Mixing Ratio
4.0 – 4.6 L water per 20 kg bag
Consumption
~5.6 – 6.4 m² per 20 kg bag (at ~2 mm thickness)
Application Conditions
Temperature: +8°C to +40°C
Pot Life: ~60 minutes
Adjustability Time: ~20 minutes
Curing Time
Wall: 7–8 hours
Floor: 24 hours
Full traffic: 14 days
Surface Preparation
Surface must be:
Clean
Sound
Level
Free from oil, grease, dust
Preparation Tips
Remove cement laitance
Use sand blasting or water jet if needed
Pre-wet absorbent surfaces (SSD condition)
Mixing Instructions
Add powder into water (4.0–4.6 L)
Mix for 3–5 minutes
Let rest for 1–2 minutes
Remix before use
Application Method
Apply adhesive using notched trowel
Spread evenly on substrate
For large tiles → apply buttering on tile back
Press tile firmly into position
Adjust within 20 minutes
Ensure full adhesive contact
Important Notes
Do NOT add extra water after mixing
Ensure full adhesive coverage (no voids)
Use back-buttering for tiles >30×30 cm
Performance Advantages
Reliable and economical tile adhesive
Easy to apply for general construction
Suitable for wide range of tile types
Good performance in Cambodia climate
Cleaning
Clean tools with water immediately
Hardened material → mechanical removal
Safety & Handling
Follow SDS guidelines
Use PPE
Store properly
Additional Notes
Lab-tested values
Site conditions may affect performance
Local regulations may vary
Summary
SikaCeram®-99 Floor & Wall KH is a cost-effective tile adhesive, ideal for general tile installation on floors and walls, offering good adhesion, easy application, and reliable performance for both interior and exterior use.