Sika AnchorFix-2+ Tropical 300ml | Anchoring adhesive for medium to high loads in hot climates

Product Category: Chemical Anchoring Adhesive Brand: Sika Model Code: Sika AnchorFix®-2+ Tropical

Description

Sika AnchorFix®-2+ Tropical is a 2-component epoxy acrylate anchoring adhesive, specially designed for medium to high load anchoring in hot and tropical climates. It is fast curing, high strength, and suitable for structural fixing applications.

Applications

Used for anchoring and fixing:

• Reinforcing steel (rebar)

• Threaded rods

• Bolts and fastening systems

Suitable substrates:

• Cracked and uncracked concrete

• Solid masonry

• Steel

• Natural stone

• Solid rock

Key Features

• Fast curing (ideal for hot climates)

• High load-bearing capacity

• Suitable for cracked concrete

• Non-sag (vertical & overhead use)

• Styrene-free and low odor

• Low material waste

• Drinking water approved

• ETA certified for anchoring systems

Certifications

• ETA for concrete anchoring

• ETA for rebar connections

• NSF/ANSI 61 (drinking water safe)

• LEED v4 compliant

Product Information

• Type: Epoxy acrylate anchoring adhesive

• System: 2-component (A + B)

• Mix Ratio: 10 : 1 (volume)

Packaging Options

• 300 ml cartridge

• 350 ml cartridge

• 550 ml cartridge

• 825 ml cartridge

• 850 ml cartridge

Colour

• Part A: Off-white

• Part B: Black

• Mixed: Grey

Shelf Life

• 15 months

Storage

• +5°C to +25°C

• Dry, sealed packaging

Density

• Mixed: ~1.65 – 1.75 kg/L

Technical Data

• Compressive Strength: ~70 N/mm²

• Tensile Strength: ~15 N/mm²

• Flexural Strength: ~29 N/mm²

• Modulus (compression): ~7000 N/mm²

Temperature Resistance

• Long term: -40°C to +50°C

• Short term: up to +80°C

Application Conditions

• Material temperature: +15°C to +40°C

• Ambient temperature: +15°C to +40°C

• Substrate temperature: +15°C to +40°C

• ≥3°C above dew point

Curing Time

Application Method (Important)

Step-by-step (as shown in diagram on page 4):

• Drill hole to required size

• Clean hole with air (≥2 times)

• Brush hole with steel brush (≥2 times)

• Clean again with air

• Repeat cleaning cycle (air + brush)

• Inject adhesive from bottom of hole

• Insert anchor with rotation

• Ensure adhesive fills hole completely

• Do not move anchor during curing

👉 The diagram on page 4 clearly shows this full process, emphasizing cleaning → injection → insertion → curing, which is critical for proper anchoring performance.

Important Notes

• Use oil-free compressed air for cleaning

• Do not load anchor before full curing

• Always insert anchor within open time

• Ensure hole is completely clean and dry

Performance Advantages

• High structural strength anchoring

• Reliable in tropical climate

• Fast installation → saves time

• Suitable for heavy-duty applications

• Professional-grade fixing system

Cleaning

• Use Sika® Colma Cleaner for tools

• Clean skin with soap and water

Safety & Handling

• Follow Safety Data Sheet (SDS)

• Use protective equipment

• Store properly in sealed packaging

Additional Notes

• Lab-tested data

• Site conditions may affect results

• Must be applied by experienced professionals

Summary

Sika AnchorFix®-2+ Tropical is a high-performance chemical anchoring system, offering fast curing, high load capacity, and reliable performance in hot climates, making it ideal for structural fixing and anchoring applications.